[BFix] ARB Q

[Erik Christensen]

Hmmm, good point. Maybe I'll take TS's suggestion and get some stainless. I only need a foot or so, just enough to stay low profile out of harms way, as the axle/diff/bulkhead get VERY close to the cross member when the suspension is compressed. Hey, a thought just occurred! I wonder if metric brake line fittings can be made to connect with the bulkhead? Have to look into that.
  ----- Original Message ----- 
  From: Brian Cooke 
  To: Erik Christensen ; BFix 
  Sent: Thursday, April 17, 2008 4:10 PM
  Subject: Re: [BFix] ARB Q


  Since you live in a MONSOON area,  :-)   I'd suggest you stay away from any metal lines to reduce condensation buildup. It won't be much, but it'll be a lot compared to nylon/plastic I'd think.



  Brian @ Columbia River Broncos...20 forward gears & 4 reverse to choose from.
    ----- Original Message ----- 
    From: Erik Christensen 
    To: BFix 
    Sent: Wednesday, April 16, 2008 8:28 PM
    Subject: [BFix] ARB Q


    Is there any reason I shouldn't run 3/16" steel brake line for part of the run on my ARB lines? To run it away from the diff to a convenient place for soft line? not positive how to mate it up, but I'm sure I could figure it out.


    Erik


----------------------------------------------------------------------------


    _______________________________________________
    bfix mailing list
    bfix at broncofix.com
    http://broncofix.com/mailman/listinfo/bfix
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.broncofix.com/pipermail/bfix/attachments/20080417/11ca3a51/attachment.html