[ebml] Re: [BFix] Explorer Accy on 351W

[Dan]

I haven't ordered the fan yet.  I planned on going with the BC Broncos fan.

I will need to run a longer spacer to move the fan forward but I have also
moved the radiator forward.  Based on the tape measure, it looks it will all
fit.

(uh oh, those are sounding like famous last words..)


-- 
Dan
Alpharetta, GA

'77 EB, C4, BC Bronco's 3.5" suspension lift, Bilstein 7100's front & 5100's
rear, BC Bronco's F150 Tie Rod Over and a very tired oil burning 302
awaiting the SEFI 5.8.




On 4/19/08 4:31 PM, "Brian Cooke" <nvrstuk at elltel.net> wrote:

> Dan,
> 
> Isn't the 94-5 wtrpump over an inch shorter than earlier wtrpumps?  Are you
> having fan clearance issues even with the shorter pump?
> 
> Brian
> 
> 
> Brian @ Columbia River Broncos...20 forward gears & 4 reverse to choose
> from.
> ----- Original Message -----
> From: "Dan" <bronco at barrhome.net>
> To: "Joe Lougee" <71broncoman at prodigy.net>
> Cc: <bfix at broncofix.com>; <ebml at broncofix.com>
> Sent: Saturday, April 19, 2008 12:27 PM
> Subject: [ebml] Re: [BFix] Explorer Accy on 351W
> 
> 
>> Joe,
>> 
>> I am in the process of installing a '95 California 5.8.  I've left the
>> stock
>> '95 serp setup on.
>> 
>> I am reconfiguring the radiator brackets to move the radiator about 3/4"
>> forward but I am not cutting the core support.  The stock hood latch
>> should
>> still work.
>> 
>> Just an FYI - this is an option for you if you want to leave the stock '94
>> front stuff on it...
>> 
>> -- 
>> Dan
>> Alpharetta, GA
>> 
>> '77 EB, C4, BC Bronco's 3.5" suspension lift, Bilstein 7100's front &
>> 5100's
>> rear, BC Bronco's F150 Tie Rod Over and a very tired oil burning 302
>> awaiting the SEFI 5.8.
>> 
>> 
>> On 4/19/08 2:28 PM, "Joe Lougee" <71broncoman at prodigy.net> wrote:
>> 
>>> I know I remember reading something about this, but someone please
>>> remind me.
>>> 
>>> I'm looking to add the Explorer front dress to a '94 351W and have a
>>> couple of questions:
>>> 
>>> 1.  The balancer assy/crank pulley.  Can this just be rebalanced by
>>> Damper Dudes?
>>> 
>>> 2.  The waterpump.  Anything special need doing here?
>>> 
>>> TIA, Joe
>>> _______________________________________________
>>> bfix mailing list
>>> bfix at broncofix.com
>>> http://broncofix.com/mailman/listinfo/bfix
>>> 
>> 
>> _______________________________________________
>> ebml mailing list
>> ebml at broncofix.com
>> http://broncofix.com/mailman/listinfo/ebml
> 
>