[ebml] Re: [BFix] Explorer Accy on 351W

[Billy]

I ran all explorer,clutch Fan, water pump, and just rebalanced the explorer 
harmonic to 28 oz.




----- Original Message ----- 
From: "Dan" <bronco at barrhome.net>
To: "Brian Cooke" <nvrstuk at elltel.net>; "Joe Lougee" 
<71broncoman at prodigy.net>; "Broncofix" <bfix at broncofix.com>
Sent: Saturday, April 19, 2008 6:58 PM
Subject: Re: [ebml] Re: [BFix] Explorer Accy on 351W


>I haven't ordered the fan yet.  I planned on going with the BC Broncos fan.
>
> I will need to run a longer spacer to move the fan forward but I have also
> moved the radiator forward.  Based on the tape measure, it looks it will 
> all
> fit.
>
> (uh oh, those are sounding like famous last words..)
>
>
> -- 
> Dan
> Alpharetta, GA
>
> '77 EB, C4, BC Bronco's 3.5" suspension lift, Bilstein 7100's front & 
> 5100's
> rear, BC Bronco's F150 Tie Rod Over and a very tired oil burning 302
> awaiting the SEFI 5.8.
>
>
>
>
> On 4/19/08 4:31 PM, "Brian Cooke" <nvrstuk at elltel.net> wrote:
>
>> Dan,
>>
>> Isn't the 94-5 wtrpump over an inch shorter than earlier wtrpumps?  Are 
>> you
>> having fan clearance issues even with the shorter pump?
>>
>> Brian
>>
>>
>> Brian @ Columbia River Broncos...20 forward gears & 4 reverse to choose
>> from.
>> ----- Original Message -----
>> From: "Dan" <bronco at barrhome.net>
>> To: "Joe Lougee" <71broncoman at prodigy.net>
>> Cc: <bfix at broncofix.com>; <ebml at broncofix.com>
>> Sent: Saturday, April 19, 2008 12:27 PM
>> Subject: [ebml] Re: [BFix] Explorer Accy on 351W
>>
>>
>>> Joe,
>>>
>>> I am in the process of installing a '95 California 5.8.  I've left the
>>> stock
>>> '95 serp setup on.
>>>
>>> I am reconfiguring the radiator brackets to move the radiator about 3/4"
>>> forward but I am not cutting the core support.  The stock hood latch
>>> should
>>> still work.
>>>
>>> Just an FYI - this is an option for you if you want to leave the stock 
>>> '94
>>> front stuff on it...
>>>
>>> -- 
>>> Dan
>>> Alpharetta, GA
>>>
>>> '77 EB, C4, BC Bronco's 3.5" suspension lift, Bilstein 7100's front &
>>> 5100's
>>> rear, BC Bronco's F150 Tie Rod Over and a very tired oil burning 302
>>> awaiting the SEFI 5.8.
>>>
>>>
>>> On 4/19/08 2:28 PM, "Joe Lougee" <71broncoman at prodigy.net> wrote:
>>>
>>>> I know I remember reading something about this, but someone please
>>>> remind me.
>>>>
>>>> I'm looking to add the Explorer front dress to a '94 351W and have a
>>>> couple of questions:
>>>>
>>>> 1.  The balancer assy/crank pulley.  Can this just be rebalanced by
>>>> Damper Dudes?
>>>>
>>>> 2.  The waterpump.  Anything special need doing here?
>>>>
>>>> TIA, Joe
>>>> _______________________________________________
>>>> bfix mailing list
>>>> bfix at broncofix.com
>>>> http://broncofix.com/mailman/listinfo/bfix
>>>>
>>>
>>> _______________________________________________
>>> ebml mailing list
>>> ebml at broncofix.com
>>> http://broncofix.com/mailman/listinfo/ebml
>>
>>
>
> _______________________________________________
> bfix mailing list
> bfix at broncofix.com
> http://broncofix.com/mailman/listinfo/bfix