[BFix] centech help

[Quinn Dusenberry]

I would call Centech directly. They were very helpful with troubleshooting a
problem I had with my installation. I had pinched a wire in the steering
column near the turn signals that was causing a short. I ended up talking to
Centech 3-4 times during the process of running that to ground.

 

  _____  

From: bfix-bounces at broncofix.com [mailto:bfix-bounces at broncofix.com] On
Behalf Of bfranklinisg at earthlink.net
Sent: Friday, April 25, 2008 5:43 PM
To: bfix
Subject: [BFix] centech help

 

I installed a centech harness over the last few months and I am going to try
to work on it some tonight maybe. Anyway, my problem is that my blinkers
flash constantly no matter if the hazard switch is on or off. I also
installed a new ididit tilt column at the same time so it's compatible with
the harness and is brand spankin new.

 

Anybody care to direct me in a good place to start lookin?

 

thanks Ben

 

 

bfranklinisg at earthlink.net

EarthLink Revolves Around You.

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.broncofix.com/pipermail/bfix/attachments/20080426/16e62a0d/attachment.html