[BFix] centech help

[bfranklinisg at earthlink.net]

Thanks Quinn, I am actually going to be home all of next week and next weekend so I am hopeful I can get this nailed down. I ended up with to issues so far with the centech install. One was the blinker issue and the other was I can't seem to get my delayed wiper switch to work at all. 

Ben


----- Original Message ----- 
From: Quinn Dusenberry 
To: bfix
Sent: 4/26/2008 8:48:51 AM 
Subject: RE: [BFix] centech help


I would call Centech directly. They were very helpful with troubleshooting a problem I had with my installation. I had pinched a wire in the steering column near the turn signals that was causing a short. I ended up talking to Centech 3-4 times during the process of running that to ground.
 



From: bfix-bounces at broncofix.com [mailto:bfix-bounces at broncofix.com] On Behalf Of bfranklinisg at earthlink.net
Sent: Friday, April 25, 2008 5:43 PM
To: bfix
Subject: [BFix] centech help
 
I installed a centech harness over the last few months and I am going to try to work on it some tonight maybe. Anyway, my problem is that my blinkers flash constantly no matter if the hazard switch is on or off. I also installed a new ididit tilt column at the same time so it's compatible with the harness and is brand spankin new.
 
Anybody care to direct me in a good place to start lookin?
 
thanks Ben
 
 
bfranklinisg at earthlink.net
EarthLink Revolves Around You.
 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.broncofix.com/pipermail/bfix/attachments/20080426/4fab2e22/attachment.html