[BFix] C4 Swap Wiring Problems

[Joe Lougee]

Frank, the Red/Blu wires are for the Neutral Saftey Switch.  One is the 
power wire in and the other out, to the starter solenoid.  If it's not 
in Park or Neutral, then the contacts won't close and allow the solenoid 
to energize.  I have no idea which is which in the harness.

The other two are for the Reverse lights.  One is the power in and the 
other is out to the lights.  Again, not sure which is which, but now you 
know which circuit it is you shouldn't have any issues looking it up in 
an EB wiring diagram.
Joe


FRANK w wrote:
> Hello,
> I am swaping a C4 trans in to a Bronco that had a 3 speed manual 
> trans. I am having a problem with the wiring. I can not find out what 
> wire goes were. I have this for wires coming out of the Neutral Safety 
> Switch.
>  
> 1.  Red wire with blue stripe
> 2.  Red wire with blue stripe
> 3.  White wire with purple stripe
> 4.  Purple wire with black stripe
>  
> I think the red with blue stripe wires go to the starter. Are the 
> other wires for the back up light? Thanks for any help.
>  
> Frank
> ------------------------------------------------------------------------
>
> _______________________________________________
> bfix mailing list
> bfix at broncofix.com
> http://broncofix.com/mailman/listinfo/bfix
>