[BFix] MASS air plug

[Steve Stewart]

I've cleaned them up before. You are saying the wire is coming out the 
back. Is the terminal still on it?
The way these disassemble is you pull out the red plastic piece on the 
inside of the connector.  Then you can release the pins.
 I'd say pull the red piece out and push the wire back in making sure 
the terminal is oriented correctly. You will hear a faint click and 
there will be some resistance to pulling back out when it is seated. The 
replace the red retainer and all should be good.

hth
 Steve
>
> Has anyone ever taken the mass air plug apart? I am talking about the 
> harness plug that plugs into the MASS air meter.  I would like some 
> pointers before ruining this one.
>  
> Ben
>  
>  
> bfranklinisg at earthlink.net <mailto:bfranklinisg at earthlink.net>
> EarthLink Revolves Around You.
>  
> ------------------------------------------------------------------------
>
> _______________________________________________
> bfix mailing list
> bfix at broncofix.com
> http://broncofix.com/mailman/listinfo/bfix
>