[BFix] MASS air plug

[bfranklinisg at earthlink.net]

No I mean the wire has come apart from the connector. Connector is still in
the plug, this was on the RJM harness thats about three years old with
minimal run time.
Thanks for the help on taking it apart.

Ben


> [Original Message]
> From: Steve Stewart <wpaeb at wpaeb.net>
> To: bfix <bfix at broncofix.com>
> Date: 4/30/2008 8:33:41 AM
> Subject: Re: [BFix] MASS air plug
>
> I've cleaned them up before. You are saying the wire is coming out the 
> back. Is the terminal still on it?
> The way these disassemble is you pull out the red plastic piece on the 
> inside of the connector.  Then you can release the pins.
>  I'd say pull the red piece out and push the wire back in making sure 
> the terminal is oriented correctly. You will hear a faint click and 
> there will be some resistance to pulling back out when it is seated. The 
> replace the red retainer and all should be good.
>
> hth
>  Steve
> >
> > Has anyone ever taken the mass air plug apart? I am talking about the 
> > harness plug that plugs into the MASS air meter.  I would like some 
> > pointers before ruining this one.
> >  
> > Ben
> >  
> >  
> > bfranklinisg at earthlink.net <mailto:bfranklinisg at earthlink.net>
> > EarthLink Revolves Around You.
> >  
> > ------------------------------------------------------------------------
> >
> > _______________________________________________
> > bfix mailing list
> > bfix at broncofix.com
> > http://broncofix.com/mailman/listinfo/bfix
> >   
>
> _______________________________________________
> bfix mailing list
> bfix at broncofix.com
> http://broncofix.com/mailman/listinfo/bfix