[BFix] Radius arms

[Joe Lougee]

The only significant difference is the spacing of the bolt holes between 
the F Series/Big Bronco vs. the EB.  If you use the same cap/radius arm 
combo you can just use the same coil spring cups, but if you mix and 
match you'll have to drill a hole to make them line up correctly.

Another note, put studs in the holes instead of using bolts.  Much 
easier to get all the parts lined up.
Joe


Laughner Bruce wrote:
> Just wanting to verify something b4 I do it. I have the radius arms off of a
> 78-79 BB with the factory mounts for dual shocks and plan on putting them on
> the boys '76. This shouldn't present any problems should it ?
>
>
> Thanks,
> Bruce G. Laughner
> '77 Bronco
>
> _______________________________________________
> bfix mailing list
> bfix at broncofix.com
> http://broncofix.com/mailman/listinfo/bfix
>
>