[BFix] Trans Help

[FRANK w]

Thanks Joe,

I got some poly trans mount bushings. Does the thick one go on top or below the transfer case crossmember. The thin one is about 3/4" thick and the thick one is about 1 1/16 " thick. Thanks again. 

Frank

  ----- Original Message ----- 
  From: Joe Lougee<mailto:71broncoman at prodigy.net> 
  To: FRANK w<mailto:bbronko at msn.com> 
  Cc: bfix<mailto:mail at broncofix.com> ; ebml<mailto:ebml at broncofix.com> 
  Sent: Sunday, May 04, 2008 2:29 PM
  Subject: Re: [BFix] Trans Help


  Assuming you're talking about the rubber bumper that's on the stock 
  cross-member, it goes toward the back of the EB.  IOW, it should touch 
  (or close to) the transfer case.
  Joe


  FRANK w wrote:
  > Hello,
  >  
  > I am now installing a trans back into my Bronco. It has been a long 
  > long time so here is the question. Does the rubber transfer case 
  > bumper go to the front or the rear of the Bronco. Thanks for any help.
  >  
  >  
  > Frank 
  > ------------------------------------------------------------------------
  >
  > _______________________________________________
  > bfix mailing list
  > bfix at broncofix.com<mailto:bfix at broncofix.com>
  > http://broncofix.com/mailman/listinfo/bfix<http://broncofix.com/mailman/listinfo/bfix>
  >   
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.broncofix.com/pipermail/bfix/attachments/20080504/c2d35f58/attachment.html