[BFix] hydraboost question

[Lee Novikoff]

Its a complete brake system from Hydratech.  I am also running a pump from 
PSC with a duel fill remote reservoir.
-Lee Novikoff
San Antonio Texas
----- Original Message ----- 
From: "Joe Lougee" <71broncoman at prodigy.net>
To: "Lee Novikoff" <Lee at tidalgroup.com>
Cc: <mail at broncofix.com>; "bronco list" <ebml at bronco.com>
Sent: Tuesday, May 06, 2008 2:36 PM
Subject: Re: [BFix] hydraboost question


> Lee, what setup are you using?  Is something that came from the 
> after-market or "home-built"?
>
> I had a similar issue happen on an install last year, I believe the 
> original MC wouldn't bleed correctly.  Once I swapped out and rebleed the 
> MC it worked like a champ.
>
> I'd also take a look at the actuator rod to MC clearance.  I believe Todd 
> Z.  will chime in on this, but said something about wanting "some" slight 
> compression at rest.
> Joe
>
>
> Lee Novikoff wrote:
>> I finally got the hydraboost installed on my wife's bronco and I have a 
>> weird thing happening.  The pedal comes back really slowly.  Also it 
>> takes a couple of seconds for the brakes to disengage after you take your 
>> foot off the pedal.  Anyone run into this before?
>> -Lee Novikoff
>> San Antonio Texas
>> ------------------------------------------------------------------------
>>
>> _______________________________________________
>> bfix mailing list
>> bfix at broncofix.com
>> http://broncofix.com/mailman/listinfo/bfix
>>