[BFix] hydraboost question

[Galen Weaver]

Do a search on classicbroncos.com

This topic has been discussed but I can remember the solution.

Also check hydratech website as well. Has lots of good info.



On 5/6/08, Joe Lougee <71broncoman at prodigy.net> wrote:
> Lee, what setup are you using?  Is something that came from the
> after-market or "home-built"?
>
> I had a similar issue happen on an install last year, I believe the
> original MC wouldn't bleed correctly.  Once I swapped out and rebleed
> the MC it worked like a champ.
>
> I'd also take a look at the actuator rod to MC clearance.  I believe
> Todd Z.  will chime in on this, but said something about wanting "some"
> slight compression at rest.
> Joe
>
>
> Lee Novikoff wrote:
> > I finally got the hydraboost installed on my wife's bronco and I have
> > a weird thing happening.  The pedal comes back really slowly.  Also it
> > takes a couple of seconds for the brakes to disengage after you take
> > your foot off the pedal.  Anyone run into this before?
> > -Lee Novikoff
> > San Antonio Texas
> > ------------------------------------------------------------------------
> >
> > _______________________________________________
> > bfix mailing list
> > bfix at broncofix.com
> > http://broncofix.com/mailman/listinfo/bfix
> >
> _______________________________________________
> bfix mailing list
> bfix at broncofix.com
> http://broncofix.com/mailman/listinfo/bfix
>

-- 
Sent from Gmail for mobile | mobile.google.com