Fw: [BFix] 4x4x2 box

[Laughner Bruce]

----- Original Message -----
From: "Laughner Bruce" <legacy1 at windstream.net>
To: "Chuck" <chuck at bcbroncos.com>
Sent: Sunday, May 11, 2008 11:52 AM
Subject: Re: [BFix] 4x4x2 box


> I have one of your frame plates coming for this. What other mods are going
> to be needed ? It has a 3 1/2" lift and I haven't decided what I am doing
as
> far as the linkages go,pro and cons of all the various options. It is
> looking like heim joints and tie rod under with an adjustable track bar so
> that narrows it down to with saddle or without and threaded rods or
welding
> on bungs (I haven't found anything on either subject). My concerns are
> reliability, handling, and interference. I am also thinking I am going to
> have to use a track bar drop bracket, but I will wait and see how it looks
> first. What about the steering arm ? Why is it every question always leads
> to another on a Bronco ?
>
>
> Thanks,
> Bruce
>
> ----- Original Message -----
> From: "Chuck" <chuck at bcbroncos.com>
> To: "Laughner Bruce" <legacy1 at windstream.net>
> Sent: Sunday, May 11, 2008 11:33 AM
> Subject: Re: [BFix] 4x4x2 box
>
>
> > Maybe because so many people do the swap we forget about the needed
mods.
> > ----- Original Message -----
> > From: "Laughner Bruce" <legacy1 at windstream.net>
> > To: "Chuck, BC" <chuck at bcbroncos.com>
> > Sent: Saturday, May 10, 2008 6:43 PM
> > Subject: Re: [BFix] 4x4x2 box
> >
> >
> > > Thanks, I guess I was expecting them to be the same for some reason.
> > >
> > >
> > > Bruce
> > >
> > >
> > > ----- Original Message -----
> > > From: "Chuck, BC" <chuck at bcbroncos.com>
> > > To: "Laughner Bruce" <legacy1 at windstream.net>; "bfix"
> <mail at broncofix.com>
> > > Sent: Saturday, May 10, 2008 4:17 PM
> > > Subject: Re: [BFix] 4x4x2 box
> > >
> > >
> > >> The bolt pattern is bigger on the 4x4 box, in fact the whole box is
> > > bigger.
> > >> The pitman arm splines are the same as the EB box and the input shaft
> is
> > >> 3/4" 36 spline like most of the EB boxes.
> > >> Chuck
> > >> toll free 888 304-2945
> > >> ----- Original Message -----
> > >> From: "Laughner Bruce" <legacy1 at windstream.net>
> > >> To: "bfix" <mail at broncofix.com>
> > >> Sent: Saturday, May 10, 2008 10:01 AM
> > >> Subject: [BFix] 4x4x2 box
> > >>
> > >>
> > >> > Is it just me or is there a size difference between the 4x4x2 box
and
> > > the
> > >> > stock box on a '76 ? I am just gathering parts on I hope to do this
> > >> > conversion this week. I appreciate the help.
> > >> >
> > >> >
> > >> >
> > >> > Thanks,
> > >> > Bruce G. Laughner
> > >> > '77 Bronco
> > >> >
> > >> > _______________________________________________
> > >> > bfix mailing list
> > >> > bfix at broncofix.com
> > >> > http://broncofix.com/mailman/listinfo/bfix
> > >>
> > >>
> > >>
> > >> --
> > >> No virus found in this incoming message.
> > >> Checked by AVG.
> > >> Version: 7.5.524 / Virus Database: 269.23.15/1426 - Release Date:
> > > 5/10/2008 11:12 AM
> > >>
> > >>
> > >
> >
> >
> >
> > --
> > No virus found in this incoming message.
> > Checked by AVG.
> > Version: 7.5.524 / Virus Database: 269.23.15/1426 - Release Date:
> 5/10/2008 11:12 AM
> >
> >
>