[BFix] 4x4x2 box

[Laughner Bruce]

Okay, so thats one more thing that I don't have figured out : ) It would be
nice to run it up higher. What Knuckles do you have ?

Bruce

----- Original Message -----
From: "Brian Cooke" <nvrstuk at elltel.net>
To: "Laughner Bruce" <legacy1 at windstream.net>
Sent: Sunday, May 11, 2008 5:08 PM
Subject: Re: [BFix] 4x4x2 box


> Nope.  I built at least 8 complete tie rod over kits for friends in E.
Wash
> and we all run 3 1/2" lifts with 2" body. None of us run 5 1/2" susp lift
> because our trails are narrow and tippy.
>
>
> Brian @ Columbia River Broncos...20 forward gears & 4 reverse to choose
> from.
> ----- Original Message -----
> From: "Laughner Bruce" <legacy1 at windstream.net>
> To: "bfix" <mail at broncofix.com>; "Brian Cooke" <nvrstuk at elltel.net>
> Sent: Sunday, May 11, 2008 1:04 PM
> Subject: Re: [BFix] 4x4x2 box
>
>
> >I ways under the impression that you should be running 5 1/2" suspension
> > before you do a tie rod over.
> >
> > Bruce
> > ----- Original Message -----
> > From: "Brian Cooke" <nvrstuk at elltel.net>
> > To: "Laughner Bruce" <legacy1 at windstream.net>
> > Sent: Sunday, May 11, 2008 4:48 PM
> > Subject: Re: [BFix] 4x4x2 box
> >
> >
> >> Just an IMO, but why force yourself to use a drop bracket by going with
a
> >> tie rod under style setup?  If you go "rod over", you pretty much
> > eliminate
> >> any need for the drop bracket. I'm still running a home made drop
bracket
> > (I
> >> run a 3 1/2" lift) that's only one inch so it doesn't interfere with
> >> anything. This was installed before I went rod over. If I go with any
> >> more
> >> of a drop than this, the bracket hits my radius arm cap because of my
> > flex.
> >>
> >> I made the tie rods out of DOM and threaded the tubing. This was before
> > you
> >> could buy any commercially available weld in inserts.
> >>
> >> I use a Yoda box so I can't answer your pitman arm question.
> >>
> >> Have fun.  :)
> >>
> >> Brian
> >>
> >> Brian @ Columbia River Broncos...20 forward gears & 4 reverse to choose
> >> from.
> >> ----- Original Message -----
> >> From: "Laughner Bruce" <legacy1 at windstream.net>
> >> To: "bfix" <mail at broncofix.com>
> >> Sent: Sunday, May 11, 2008 8:29 AM
> >> Subject: Fw: [BFix] 4x4x2 box
> >>
> >>
> >> >
> >> > ----- Original Message -----
> >> > From: "Laughner Bruce" <legacy1 at windstream.net>
> >> > To: "Chuck" <chuck at bcbroncos.com>
> >> > Sent: Sunday, May 11, 2008 11:52 AM
> >> > Subject: Re: [BFix] 4x4x2 box
> >> >
> >> >
> >> >> I have one of your frame plates coming for this. What other mods are
> >> >> going
> >> >> to be needed ? It has a 3 1/2" lift and I haven't decided what I am
> > doing
> >> > as
> >> >> far as the linkages go,pro and cons of all the various options. It
is
> >> >> looking like heim joints and tie rod under with an adjustable track
> >> >> bar
> >> >> so
> >> >> that narrows it down to with saddle or without and threaded rods or
> >> > welding
> >> >> on bungs (I haven't found anything on either subject). My concerns
are
> >> >> reliability, handling, and interference. I am also thinking I am
going
> > to
> >> >> have to use a track bar drop bracket, but I will wait and see how it
> >> >> looks
> >> >> first. What about the steering arm ? Why is it every question always
> >> >> leads
> >> >> to another on a Bronco ?
> >> >>
> >> >>
> >> >> Thanks,
> >> >> Bruce
> >> >>
> >> >> ----- Original Message -----
> >> >> From: "Chuck" <chuck at bcbroncos.com>
> >> >> To: "Laughner Bruce" <legacy1 at windstream.net>
> >> >> Sent: Sunday, May 11, 2008 11:33 AM
> >> >> Subject: Re: [BFix] 4x4x2 box
> >> >>
> >> >>
> >> >> > Maybe because so many people do the swap we forget about the
needed
> >> > mods.
> >> >> > ----- Original Message -----
> >> >> > From: "Laughner Bruce" <legacy1 at windstream.net>
> >> >> > To: "Chuck, BC" <chuck at bcbroncos.com>
> >> >> > Sent: Saturday, May 10, 2008 6:43 PM
> >> >> > Subject: Re: [BFix] 4x4x2 box
> >> >> >
> >> >> >
> >> >> > > Thanks, I guess I was expecting them to be the same for some
> > reason.
> >> >> > >
> >> >> > >
> >> >> > > Bruce
> >> >> > >
> >> >> > >
> >> >> > > ----- Original Message -----
> >> >> > > From: "Chuck, BC" <chuck at bcbroncos.com>
> >> >> > > To: "Laughner Bruce" <legacy1 at windstream.net>; "bfix"
> >> >> <mail at broncofix.com>
> >> >> > > Sent: Saturday, May 10, 2008 4:17 PM
> >> >> > > Subject: Re: [BFix] 4x4x2 box
> >> >> > >
> >> >> > >
> >> >> > >> The bolt pattern is bigger on the 4x4 box, in fact the whole
box
> > is
> >> >> > > bigger.
> >> >> > >> The pitman arm splines are the same as the EB box and the input
> >> >> > >> shaft
> >> >> is
> >> >> > >> 3/4" 36 spline like most of the EB boxes.
> >> >> > >> Chuck
> >> >> > >> toll free 888 304-2945
> >> >> > >> ----- Original Message -----
> >> >> > >> From: "Laughner Bruce" <legacy1 at windstream.net>
> >> >> > >> To: "bfix" <mail at broncofix.com>
> >> >> > >> Sent: Saturday, May 10, 2008 10:01 AM
> >> >> > >> Subject: [BFix] 4x4x2 box
> >> >> > >>
> >> >> > >>
> >> >> > >> > Is it just me or is there a size difference between the 4x4x2
> > box
> >> > and
> >> >> > > the
> >> >> > >> > stock box on a '76 ? I am just gathering parts on I hope to
do
> >> >> > >> > this
> >> >> > >> > conversion this week. I appreciate the help.
> >> >> > >> >
> >> >> > >> >
> >> >> > >> >
> >> >> > >> > Thanks,
> >> >> > >> > Bruce G. Laughner
> >> >> > >> > '77 Bronco
> >> >> > >> >
> >> >> > >> > _______________________________________________
> >> >> > >> > bfix mailing list
> >> >> > >> > bfix at broncofix.com
> >> >> > >> > http://broncofix.com/mailman/listinfo/bfix
> >> >> > >>
> >> >> > >>
> >> >> > >>
> >> >> > >> --
> >> >> > >> No virus found in this incoming message.
> >> >> > >> Checked by AVG.
> >> >> > >> Version: 7.5.524 / Virus Database: 269.23.15/1426 - Release
Date:
> >> >> > > 5/10/2008 11:12 AM
> >> >> > >>
> >> >> > >>
> >> >> > >
> >> >> >
> >> >> >
> >> >> >
> >> >> > --
> >> >> > No virus found in this incoming message.
> >> >> > Checked by AVG.
> >> >> > Version: 7.5.524 / Virus Database: 269.23.15/1426 - Release Date:
> >> >> 5/10/2008 11:12 AM
> >> >> >
> >> >> >
> >> >>
> >> >
> >> > _______________________________________________
> >> > bfix mailing list
> >> > bfix at broncofix.com
> >> > http://broncofix.com/mailman/listinfo/bfix
> >>
> >>
> >>
> >> --
> >> No virus found in this incoming message.
> >> Checked by AVG.
> >> Version: 7.5.524 / Virus Database: 269.23.15/1426 - Release Date:
> > 5/10/2008 11:12 AM
> >>
> >>
> >
>
>
>
> --
> No virus found in this incoming message.
> Checked by AVG.
> Version: 7.5.524 / Virus Database: 269.23.15/1426 - Release Date:
5/10/2008 11:12 AM
>
>